Two Stage Water Ring Vacuum Pump

Supported by our state-of-the-art infrastructure facility, we are engaged in manufacturing, supplying and exporting Two Stage Watering Vacuum Pump. Manufactured using optimum-grade material, our offerings find their extensive application in piping, drainage, drying resins and other such works. To rule out the possibility of any defect, a team of our quality experts strictly examines these pumps on multiple parameters. Our clients can avail Two Stage Watering Vacuum Pump in different models and other specifications.

Features:

• Minimal maintenance
• Rust-proof
• Simple installation
• Less water consumption

Other features:

• Entrained liquid drops, Condensible vapors, or occasional slugs of liquid can be handled without damage to the pump or significant effect on capacity. In the case of vapors, the pump can also serve as a condenser.
• No lubricant or oil is required within the pump itself. Thus the air or other discharge gases are not contaminated. The liquid which forms the ring (usually water) serves both as a sealant and a pumping media.
• A wide selection of materials and seal liquids can be used when corrosive gases and vapors are being pumped.
• The pumps contain no metal parts that rub against each other. Packing glands and bearings are accessible from the outside. There is no clearance volume and the pumping action is smooth and uniform (non-pulsating). The only moving part is a balanced impeller which reduces noise and vibration. This means lower foundation, installation and service costs.
• The pump can be provided with partial liquid recycle, closed loop liquid operation, automatic control and other features.
• Mechanical seals can be provided as an option.
• Small entrained solid will pass through the pump. However, abrasive particles, will result in reduce pump life.
• Each pump is performance tested prior to shipment.

Wide choice of Materials

Standard material of construction is cast iron with semi steel rotor. Shaft material is stainless steel for model LM-15 to LM-75, large size are carbon steel with brass of stainless steel shaft sleeves for wetted parts. Alternate combination materials are available for special applications.

Some specific Applications

• Draining paper webs.
• Saturating insulation materials, wood and textiles.
• Evacuation condensers and piping 
  
• Priming pumps
• Evaporation acids, blood and milk.
• Drying resins, paints and chemicals.
• Convening wheat, sugar and chemical products.
• Lifting and transporting wood and plates.
  
  

Type MIWR	Motor H.P.Vacuum Pumps	Pump Speed R.P.M	Suction Capacity		Water Consumption Ltr/min
			C.F.M	m3/hr.
LM-W15	1	2800	15	25	4
LM-W20	2	2800	23	37	6
LM-W30	3	2800	30	51	7
LM-W50	5	2800	50	85	10
LM-W75	7.5	2800	75	128	14
LM-W100	7.5	1500	100	170	16
LM-W130	10	1500	130	220	20
LM-W200	15	1500	200	340	30
LM-W300	20	1500	300	510	40
LM-W430	30	980	430	725	60
LM-W500	35	980	500	850	80
LM-W650	40	980	650	1105	85

Two Stage Watering Vacuum Pump

• Max. Vacuum Achieve : 725 mm.Hg.
• Capacity : 80M3/ Hr to 500 M3/Hr
• Recommended Motor : 5 HP to 20 HP
• Material of Conts : C.I Partial Bronze (GBZ) , Partial S.S, S.S, Rubber lined, And other on demand
• Sealing Water Temp. : 30C.
• Drive : Direct Coupled
• Larger capacity Pumps Available upon request. 

Product details

Recommended Motor	5 HP
Sealing Water Temp	30 Degree C
Number of Stages	Double Stage
Brand	Leelam Industries
Automation Grade	Automatic
Material	Cast Iron
Phase	Three Phase
Capacity	80 m3/Hr
Usage/Application	Industrial